ICP-MS Standards

1.ICP-MS CHECKOUT SOLUTIONS FOR 7500S

ICP-MS Checkout Solutio for 7500s Sys Install kit contains: Tuning Soln, Dual Mode (1), Dual Mode (2), Abund Sens (1), Abund Sens (2), DetectLimit, High Sens Tune, Wash, and Water Blank Solns

2.ICP-MS CHECKOUT SOLUTIONS FOR 7500A/I/C

ICP-MS Checkout Soln for 7500a and 7500i Sys Install kit contains: Tuning soln, Dual Mode (1), Dual Mode (2), Wash and Water Blank Solns

3.TUNING SOLUTION (2 X 500ML)

Tuning Solution Contains 10 ppb Li, Y, Ce, Tl, Co in 0.2 wt % HNO3

4.SOLUTION TUNING

5.ICPMS CONE CLEANING DETERGENT, 1 GALLON

ICPMS cone cleaning detergent, 1 gallon for ICP-MS sampling cones, skimmer and lenses

6.ICP-MS INTERNAL STD MIX

ICP-MS internal Std Mix For use with ICP-MS. Contains:100 ppm of 6-Li, Sc, Ge, Rh, In, Tb, Lu, Bi 100ml, Matrix 10% HNO3

7.6020 INTERFERENCE CHECK SOLUTION A 100ML

6020 Interference Check Solution A For use with ICP-MS. Contains:Cl, C, Al, Ca, Fe, K, Mg, Na, P, S, Mo, Ti in various conc.:100ml, Matrix=5% HNO3

8.6020 INTERFERENCE CHECK SOLUTION B 100ML

6020 Interference Check Solution B For use with ICP-MS. Contains: Cr, Co, Cu, Mn, Ni, V, As, Cd, Se, Zn, Ag in various conc.;100ml, Matrix=5% HNO3

9.BISMUTH INTERNAL STANDARD STOCK SOLUTION

Bismuth Internal Standard Stock Solution for use with the 4500 ICP-MS Element is Bismuth; 100mls at 10ug/ml matrix = 2% HNO3

10.MULTI-ELEMENT CALIBRATION STD 2A

Multi-Element Calibration Standard 2A Ag, Al, As, Ba, Be, Ca, Cd, Cu Co, Cr, Cs, Fe, Ga, Hg, K, Li, mg, mn, Na, Ni, Pb, Rb, Se, Sr, Tl, U and Zn j, 100ml 10 ug/ml, matrix = 5% HNO3